Model view controller (MVC) is a very useful and popular design pattern. If you’re writing software, you should know it. Unfortunately it’s also one of the hardest to truly understand. In this article I will provide what I think is the simplest explanation of MVC, and why you should use it.

What is Model View Controller (MVC)?

In a typical application you will find these three fundamental parts:

Data (Model)
An interface to view and modify the data (View)
Operations that can be performed on the data (Controller)

The MVC pattern, in a nutshell, is this:

The model represents the data, and does nothing else. The model does NOT depend on the controller or the view.
The view displays the model data, and sends user actions (e.g. button clicks) to the controller. The view can:
- be independent of both the model and the controller; or
- actually be the controller, and therefore depend on the model.
The controller provides model data to the view, and interprets user actions such as button clicks. The controller depends on the view and the model. In some cases, the controller and the view are the same object.

Rule 1 is the golden rule of MVC so I’ll repeat it:

The model represents the data, and does nothing else. The model does NOT depend on the controller or the view.

Let’s take an address book application as an example. The model is a list of Person objects, the view is a GUI window that displays the list of people, and the controller handles actions such as “Delete person”, “Add person”, “Email person”, etc. The following example does not use MVC because the model depends on the view.

//Example 1:
void Person::setPicture(Picture pict){
    m_picture = pict; //set the member variable
    m_listView->reloadData(); //update the view
}

The following example uses MVC:

//Example 2:
void Person::setPicture(Picture pict){
    m_picture = pict; //set the member variable
}

void PersonListController::changePictureAtIndex(Picture newPict, int personIndex){
    m_personList[personIndex].setPicture(newPict); //modify the model
    m_listView->reloadData(); //update the view
}

In the above example, the Person class knows nothing about the view. The PersonListControllerhandles both changing the model, and updating the view. The view window tells the controller about user actions (in this case, it tells the controller that the user changed the picture of a person).

What is the advantage of MVC?

Unnecessary complexity is the devil of software development. Complexity leads to software that is buggy, and expensive to maintain. The easiest way to make code overly complex is to put dependencies everywhere. Conversely, removing unnecessary dependencies makes delightful code that is less buggy and easier to maintain because it is reusable without modification. You can happily reuse old, stable code without introducing new bugs into it.

The primary advantage of the MVC design pattern is this:

MVC makes model classes reusable without modification.

The purpose of the controller is to remove the view dependency from the model. By removing the view dependency from the model, the model code becomes delightful.

Why is the model code so delightful? Let’s continue with the address book application example. The project manager approaches the developer and says “We love the contact list window, but we need a second window that displays all the contacts by their photos only. The photos should be in a table layout, with five photos per row.”

If the application uses MVC, this task is pretty straight forward. Currently there are three classes: Person, PersonListController, and PersonListView. Two classes need to be created: PersonPhotoGridView and PersonPhotoGridController. The Person class remains the same, and is easily plugged into the two different views. How delightful.

If the application is structured badly like in Example 1, then things get more complicated. Currently there are two classes Person, and PersonListView. The Person class can not be plugged into another view, because it contains code specific to PersonListView. The developer must modify the Personclass to accommodate the new PersonPhotoGridView, and ends up complicating the model like so:

//Example 3:
void Person::setPicture(Picture pict){
    m_picture = pict; //set the member variable
    if(m_listView){ //check if it's in a list view
        m_listView->reloadData(); //update the list view
    }
    if(m_gridView){ //check if it's in a grid view
        m_gridView->reloadData(); //update the grid view
    }
}

As you can see, the model code is starting to turn nasty. If the project manager then says “we’re porting the app to a platform with a different GUI toolkit” the delightfulness is even more prominent. With MVC, the Person class can be displayed by different GUI toolkits without any modification. Just make a controller and a view with the new toolkit, just as you would with the old toolkit. Without MVC, it is a nightmare to support multiple GUI toolkits. The code may end up looking like this:

//Example 4:
void Person::setPicture(Picture pict){
    m_picture = pict;
#ifdef ORIGINAL_GUI_TOOLKIT
    if(m_listView){ //check if it's in a list view
        m_listView->reloadData(); //update the list view
    }
    if(m_gridView){ //check if it's in a grid view
        m_gridView->reloadData(); //update the grid view
    }
#endif
#ifdef NEW_GUI_TOOLKIT
    if(m_listView){ //check if it's in a list view
        m_listView->redisplayData(); //update the list view
    }
    if(m_gridView){ //check if it's in a grid view
        m_gridView->redisplayData(); //update the grid view
    }
#endif
}

The setPicture method is basically spaghetti code at this point.

Why not put the controller code in the view?

One solution to the spaghetti code problem in Example 4 is to move the controller code from the model to the view like so:

//Example 5:
PersonListView::newPictureClicked(Picture clickedPicture){
    m_selectedPerson.setPicture(clickedPicture);
    this->reloadData();
}

The above example also makes the model reusable, which is the main advantage of MVC. When the view will only ever display one type of model object, then combining the view and the controller is fine. For example, a SinglePersonView will only ever display a Person object, so the SinglePersonView can double as the controller.

However, if the controller is separate from the view then MVC has a second advantage:

MVC can also make the view reusable without modification.

Not only does MVC make the model delightful, it can also make the view delightful. Ideally, a list view should be able to display lists of anything, not just Person objects. The code in Example 5 can not be a generic list view, because it is tied to the model (the Person class). In the situation where the view should be reusable (e.g. a list view, or a table view) and the model should be reusable, MVC is the only thing that will work. The controller removes the dependencies from both the model and the view, which allows them to be reused elsewhere.

Conclusion

The MVC design pattern inserts a controller class between the view and the model to remove the model-view dependencies. With the dependencies removed, the model, and possibly the view, can be made reusable without modification. This makes implementing new features and maintenance a breeze. The users get stable software quickly, the company saves money, and the developers don’t go insane. How good is that?

Model View Controller Explained

What is Model View Controller (MVC)?

What is the advantage of MVC?

Why not put the controller code in the view?

Conclusion